Where can a fire extinguisher be found in a lab

Installation height. Extinguishers need to be installed at least 4 inches off the ground up to a maximum of 5ft. The exception to this is for extinguishers heavier than 40 lbs, they can only be up to 3 ft 6 inches off the …

Simple Answers to 5 Common Fire Extinguisher Location Questions

Requirements for fire extinguisher size and spacing based on your hazard level are located in Table 6.2.1.1 of NFPA 10. To determine the minimum number of extinguish-ers needed, divide the total floor area by the maxi-mum floor area to be protected per extinguisher.

What type of fire extinguisher do I need for a lab?

Fire extinguishers are identified by their effectiveness in combatting the classes of fire listed above: A, ABC, BC, and D. According to Fire Extinguisher 101, the best extinguisher for a lab is ABC, a dry chemical unit, which is able to manage A, B, and C fires.

Also Check: How far from fire hydrant hawaii

Where do you need a fire extinguisher?

Here are the locations where each type of extinguisher is required: Class A: Locations that contain ordinary combustible materials, including offices, classrooms, and assembly halls. Class B: Workshops, storage areas, garages, warehouses, or service and manufacturing areas that contain flammable liquids or gasses.

How do you identify a fire extinguisher?

Fire extinguishers are required to be easily identifiable. Sometimes, however, they may not be so easy to spot from a distance. Extinguishers may be blocked from view by obstructions such as shelving or open doors, or the person may be standing at the wrong angle.

What class of Fire is not found in a laboratory?

The only fire class not found in a lab is Class K, or kitchen fire. Similarly, laboratories covered by the standard are classified based on the type and amount of flammable gases and flammable and combustible liquids present – not by the fire classifications above.

Also Check: How does sodium bicarbonate work in fire extinguishers