How to use a fire extinguisher uk video

S – Sweep from side to side. Sweep the spray from left to right until the flames are completely extinguished. If one extinguisher cannot put the fire out, leave the fire and get yourself out. Top Tips. When using a CO2 fire extinguisher, never hold the horn as it becomes …

This program addresses the information a person needs to know in order to select and safely use a portable fire extinguisher in the workplace. The program co…

How to use a fire extinguisher? | Fire Protection …

3. Break the tamperproof seal and pull the pin. 4. Hold the operating lever in one hand and with the other, remove the discharge hose nozzle from its storage point. Hold the discharge hose 5cm from the nozzle. 5. While …

This training resource is now available for pre-order:https://www.bvs.co.uk/how-to-use-fire-extinguishersBRAND NEW FOR 2019! All-new content, fully updated …

Also Check: Where can you a fire extinguisher

What are the steps of using a fire extinguisher?

There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

Also Check: How to choose and use a fire extinguisher

What is the proper way to use a fire extinguisher?

P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

Also Check: Where do you aim fire extinguisher

People Also Searches how to use a fire extinguisher uk video

youtube videos fire extinguishers safety

youtube fire extinguisher training video

fire extinguisher on youtube

youtube fire extinguisher video

fire extinguisher training videos

fire extinguisher safety video

pass fire extinguisher training video

how to use a fire extinguisher handout