How to open a fire hydrant

OK to open a fire hydrant safely (including one with a lock) that you have the legal right to open, you follow this process: Start by roping off the area around it. This means that when the water comes shooting out that it is unlikely to hit a passer-by, though if you have the “spray cap” on properly, this is just a precaution. Inspect the fire hydrant.

Step 2: Prepare to Open the Hydrant by Removing the Lock. Take off any jewelry or watches on your hands and put on your safety glasses – you don’t want this next part to go wrong. Then take out your screwdriver, wrench, or flathead and slowly begin attacking the …

How to Open a Fire Hydrant – YouTube

*FIRE HYDRANTS ARE ONLY TO BE OPENED BY THE FIRE DEPARTMENT UNLESS OTHERWISE AUTHORIZED*~I’m not responsible for your actions…Here’s a quick video I took w…

Also Check: Why are fire hydrants important

After inserting Fire Hydrant to Fire Hose Adapter attach Fire Hyrant Wrench (B) 1) Turn Fire Hydrant Wrench clockwise to Tighten the Adapter After the Fire Hose Adapter is tightened, you may now insert the Fire Hose (B) Turn the Fire Hose Clockwise tightly (B) After the Fire Hose is attached, you must now turn the water valve (A) Put the Fire Hydrant Wrench on the water valve (A) 1) Turn the Fire Hydrant …

How far should a fire hydrant be from a driveway?

Driveway (measured from edge of driveway at sidewalk) 7.5 feet . Edge streetlight poles. 20 feet . Edge of fire hydrants. 5 feet . Edge of utility poles. 10 feet . Extension of cross street curb at an intersection. 30 feet . Underground utilities. 5 feet (except ducts and gas pipes as shown on Seattle Standard Plan 030 for residential streets)

Also Check: How to drain a fire hydrant with air

How to connect to a hydrant?

Products Needed:One fire hydrant wrenchHydrant ball valve with 2 1/2" NH / NST female inlet by 2 1/2" NH / NST male outlet2 1/2" Single, double or rubber covered hose with NH / NST threads2 1/2" NH / NST nozzle

What is the required operating distance around a fire hydrant?

on a dead end 6-inch line. There shall be at least one fire hydrant at each street intersection. The maximum distance between fire hydrants, measured along street centerlines, shall be 500 feet, except when residential intersections are not more than 700 feet apart; no hydrant is required between the intersections.

How many feet can you be from a fire hydrant?

You have to be at least 15 feet away from a fire hydrant and 20 feet away from a crosswalk at an intersection. And if you end up parking too close to one, it could end up costing you $115! If you are not driving a passenger vehicle, do not park less than 15 feet from the pump.

Also Check: How a fire hydrant system works

People Also Searches how to open a fire hydrant

how to use fire hydrant

tool to open fire hydrant

how does fire hydrant work

how a fire hydrant works

how to do fire hydrant

fire hydrant spray cap

firefighter fire hydrant

locks for fire hydrants