It can be difficult to think clearly during an emergency, so fire safety has a long-standing acronym to help you recall the steps involved in operating your fire extinguisher. When extinguishing a fire, you should PASS: P: Pull the pin on the fire extinguisher. A: Aim the extinguisher nozzle on the hose low, toward the base of the fire.
How to Use a Fire Extinguisher – Step by Step Guide
How to Use a Fire Extinguisher Learn the PASS System. For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly. Sweep the nozzle from side to side at the base of the fire.
People Also Ask how operate a fire extinguisher
What are the steps of using a fire extinguisher?
There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.
How to use a fire extinguisher safely and effectively?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
Do you know how to properly use a fire extinguisher?
To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.
What is the proper way to use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
People Also Searches how operate a fire extinguisher
| how to use a fire extinguisher handout |
| how to use a fire extinguisher pdf |
| types of fire extinguishers |
| kidde fire extinguisher |
| what fire extinguisher to use |
| fire extinguisher procedure |
| fire extinguisher safety |
| osha fire extinguisher training requirements |
How to Use a Fire Extinguisher Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher