How to operate fire extinguisher pdf

Where to aim the ﬁre extinguisher hose: a. Solid Materials: Aim the hose at the base of the ﬂames, moving across the area of the ﬁre. b. Spilled liquids: Aim the hose at the near edge of the ﬁre and with a rapid sweeping motion; drive the ﬁre towards the far edge until the ﬂames have been extinguished. c.

1. Sound the fire alarmand call the fire department, if appropriate. 2. Identify a safe evacuation pathbefore approaching the fire. 3. Do not allow the fire, heat, or smoke to come between you and your evacuation path. 4. Select the appropriate typeof fire extinguisher. Using a Fire Extinguisher Safely.

Fire Extinguisher Information & User Guide

Evacuate immediately if the fire progresses beyond the incipient stage. Most fire extinguishers operate using the following P.A.S.S. technique: 1. PULL… Pull the pin. This will also break the tamper seal. 2. AIM… Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. Note: Do not touch the plastic discharge horn on

Also Check: Is breathing fire extinguisher bad

What are the four steps for using a fire extinguisher?

What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

Also Check: What to know about fire extinguishers

What is the proper way to use a fire extinguisher?

P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

Also Check: What does pass mean for a fire extinguisher

People Also Searches how to operate fire extinguisher pdf

osha fire extinguisher training pdf

free fire extinguisher handouts

fire extinguisher pass method pdf

fire extinguisher training pamphlet

how to use a portable fire extinguisher

fire extinguisher handout pdf

pass for fire extinguisher pdf

fire extinguisher instruction