Where must fire extinguishers be located at a mine

Extinguishers need to be installed at least 4 inches off the ground up to a maximum of 5ft. The exception to this is for extinguishers heavier than 40 lbs, they can only be up to 3 ft 6 inches off the ground and wheeled fire

Please remember that fire extinguishers must be placed away from the heat sources, or you can say within 30 feet of the heat sources. The importance of setting a fire extinguisher away from the heat source is that when the fire erupts, you will not have to go to the source that is already emitting so much heat!

Fire Extinguisher Placement Guide | NFPA

The recommended placement for a fire extinguisher in these kinds of workspaces is at eye level, directly beside all entranceways. If it is a large workspace with machinery that can overheat or cause sparks, it’s important to …

Also Check:  Is it safe to clean up fire extinguisher powder

People Also Ask where must fire extinguishers be located at a mine

How well do you remember where your fire extinguishers are located?

Ideally, you should be able to recall where each fire extinguisher is located. Over time, it’s common for these life-saving tools to just become part of the scenery, so it’s essential to refresh your memory on where all emergency equipment is located on your property.

What is the floor area of a Class A fire extinguisher?

The maximum travel distance is often the limiting factor but for certain Class A extinguishers there is an additional floor area limitation. This maximum floor area that a single extinguisher can cover is directly related to the numerical A rating and level of hazard occupancy but reaches a maximum of 11,250 ft 2.

Also Check:  What metal is a fire extinguisher made of

How far apart do fire extinguishers need to be?

Many people are under the impression that fire extinguishers need to be located a certain distance apart from each other; however, as with location, the distance requirements for fire extinguishers are actually based on the size of the area, the type of fire extinguishers, and the locations of potential hazards.

Why are fire extinguishers distributed where they are?

When distributing portable fire extinguishers an additional level of complexity is added when walls, obstructions and other structural features that limit movement are taken into consideration. Extinguishers need to be located along normal paths of travel. This is because extinguishers should be available to occupants when evacuating.

Also Check:  What chemicals are inside a fire extinguisher

People Also Searches where must fire extinguishers be located at a mine

Fire Extinguisher Locations 14-0 Video Answer


Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher

Leave a Comment